Highpoint RocketRAID 2302 Guia do Utilizador descarregar pdf (Página 28)

Use the drop down menus to enable or disable controller functions.

Using the DOS mode utility (load.exe):

Load xxx.xxx –c

Note: “xxx.xxx” refers to the BIOS image file.

A BIOS menu similar to the BIOS setup utility will be displayed.

This sub-menu allows the administrator to enable/disable various controller

functions.

Several of the more common functions are described below:

Keyboard Timeout (diag.exe) / Stop on Error (hptflash.exe) – disabling this

option will prompt the card to automatically skip error messages during

bootup (broken array warnings), if the administrator does not input the

“Control + H” command to access the BIOS menu.

EBDA Reallocation – this function refers to “Extended BIOS Data Area”.

Disabling this feature may remedy boot problems associated with

motherboards that halt after the RR230x BIOS screen is displayed.

INT13 – The card’s boot function. Disabling this feature removes the card’s

ability to boot the system. This may be useful for systems that utilize

multiple bootable controllers – some motherboards may not be able to load

the BIOS of each device during bootup, which may impair the system’s

ability to boot from a specific device.

Control-H – Allows the administrator to adjust the time allotted for hard disk scan-

ning/detection. This may be useful for hard disks that do not support Staggered

Drive Spinup.

RocketRAID 230x BIOS Utility

3-9

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 80 81

Sem comentários

Highpoint RocketRAID 2302 Guia do Utilizador Página 28